Transmitting of sample grade line of
cross-section to situation
from command
line: sngDMTINSCS
toolbar:
Command transmits sample
grade line from cross-section to situation on feature line (e.g. axis of communication in
3D). Vertical exaggeration
factor is recalculated to value of 1.
Inserted cross section is accommodated to TIN.
Design line is
object 3dCurve (3dPolyline or 3DCURVE).
The
following prompts are displayed:
Select sample grade line of
cross-section: select curve representing grade
line
Select axis of cross-section: select line representing axis of
cross-section
Vertical
exaggeration factor: enter vertical
exaggeration factor,
according to it heights on grade line will be
recalculated Choose feature line:
select 3dCurve on which cross section will
be placed
Select trianle mesh:select triangle mesh (TIN), according to it
is cross section shortened or lengthened (if possible)
to TIN
Insert
cross section to feature
line Pick/Interval/Stationing/<Stationing>:
determine mode of insertion
Cross section inserted to 3dCurve
(feature line)
|